Skip to content
TECH Consult

Laptop Won't Turn On: Step-by-Step Checks Before Repair

Laptop with no power, a black screen or stuck on the logo? The checks you can do at home, in order, and how to keep your data safe.

Published 10 min read

You press the power button and nothing happens. Or the fan starts but the screen stays black. Or the logo appears and the laptop freezes there. All of these get called “my laptop won’t turn on”, but they have different causes, and many can be fixed without a repair. Below are the checks you can do at home, in the order a technician would do them, plus what to avoid so you don’t lose your data.

What exactly isn’t starting

The first step is to notice exactly what happens when you press the button. Each symptom points to a different area:

What you see Where the problem usually is
No lights, no sound Power: charger, charging port, battery, motherboard
Lights come on, fan spins, screen stays black Screen, graphics, memory, BIOS
Manufacturer logo appears, then it freezes Disk, BIOS, a failed update
Windows starts, then a blue screen or restart Windows, drivers, disk
It asks for a BitLocker recovery key Disk encryption, not a fault

Write down what you saw. If the laptop ends up in a repair shop, an exact description shortens the diagnosis. “The charging light blinks orange three times” says far more than “it doesn’t work”.

Think about what happened just before, too: an update, a fall, a knocked-over glass, a power cut, a borrowed charger. The cause is often right there.

No power at all: charger and battery

When the laptop shows no sign of life, start with the power. It sounds obvious, but it’s the most common cause.

  1. Check the socket. Plug in another device, or move the charger to a different wall socket, without an extension lead.
  2. Check the charger. Many chargers have a light on the brick. If it’s off, look at the cable, especially at the ends, where it breaks most often. The charger has two cables: wall to brick and brick to laptop. Either can fail.
  3. Check the laptop’s charging port. If the plug sits loosely, wobbles in the port, or the laptop only charges when it’s held at a certain angle, the port or its solder joints have worked loose.
  4. Leave it plugged in for an hour. A completely flat battery sometimes won’t accept a start straight away. The charging light should come on after a few minutes.
  5. Try another compatible charger. Only one with the same voltage and the same plug, or a USB-C charger with enough power if your laptop charges over USB-C.

One more step that works surprisingly often is draining the residual charge. Unplug the charger and every peripheral, remove the battery if it comes out from the outside, then hold the power button down for a while. Many laptops with internal batteries have a small reset pinhole underneath or a key combination instead; search the manual for your exact model for “reset” or “power drain”.

If the laptop starts when plugged in but dies as soon as you unplug the charger, the battery is the problem. The signs of a worn battery are covered in the article on when to replace a laptop battery.

Lights on, but a black screen

The laptop seems to start, you can hear the fan, but you see nothing. Before you assume the worst, try these checks:

  • Brightness. Press the brightness key a few times (usually together with Fn). Sometimes the screen is simply turned all the way down.
  • A torch. Shine your phone’s torch at the screen from the side. If you can faintly see the desktop, the picture is there but the screen’s backlight has failed.
  • An external monitor. Connect the laptop by HDMI to a TV or monitor and press Windows + P. If the picture shows up there, the laptop works and the fault is in the screen or its cable.
  • Restart the graphics driver. Press Windows + Ctrl + Shift + B. The screen flickers, and if the graphics driver had frozen, the picture comes back.

Some laptops signal faults with beeps or with blinking lights (for example the Caps Lock light or the charging light, in a particular rhythm). The codes differ between manufacturers and are explained in the service manual for your model. Count the blinks and look up the code: it may point to the memory, graphics or BIOS.

If you’ve recently fitted new memory, take it out and try again. Incompatible or badly seated memory produces exactly this symptom.

Stuck on the logo or in a repair loop

If the manufacturer’s logo appears and nothing happens after that, or Windows restarts endlessly with an automatic repair message, the laptop itself works. The problem is the disk or Windows.

Windows has its own recovery environment (Windows Recovery Environment). It usually appears by itself after a few failed starts. From there, under Troubleshoot → Advanced options, you have:

  • Startup Repair, which tries to fix the start-up files by itself;
  • Uninstall Updates, useful if the problem began right after an update;
  • System Restore, if you have restore points;
  • Startup Settings, from which you can start in Safe Mode.

Try them in that order. Don’t choose Reset this PC until your data is saved: even the “Keep my files” option removes your programs, and on a failing disk any heavy writing can make things worse.

A sign that the disk is to blame: in the BIOS (the key varies by manufacturer: F2, F10, Del or Esc), the disk no longer appears in the list, or shows a different capacity. If the laptop still has an old-style hard drive and you hear clicking, switch it off at once. Every start can damage more of the disk. There’s more detail in the article on hard drive data recovery.

If Windows starts but blue screens keep appearing, the causes and fixes are in our guide to fixing the Windows blue screen.

Laptop asks for a BitLocker recovery key

Sometimes the laptop starts, but instead of Windows you get a blue screen asking for a long BitLocker recovery key. It isn’t a virus and it isn’t a fault. The disk is encrypted, and the laptop has noticed a change (a BIOS update, a replaced part, a changed setting) and wants proof that you’re the owner.

Where to find the key, according to Microsoft’s guide to finding your BitLocker recovery key:

  • in the Microsoft account used on the laptop, from another device, at aka.ms/myrecoverykey;
  • on a printout made when encryption was turned on;
  • on a USB stick you saved it to at the time.

Compare the first characters of the key ID shown on screen with the ones in your account. If someone else set up the laptop (a child, a seller, a colleague), the key may be in that person’s account. Without the key, the data on the disk can’t be read, and Microsoft states clearly that resetting the laptop deletes all files. It’s worth checking your account now, while the laptop works, and writing the key down somewhere safe.

After a drop, an update or a spill

What you should do depends on what happened.

After a drop, don’t keep trying to start it if you hear new noises. An old-style hard drive knocked while it was running can fail mechanically, and the screen or its connector can come loose. An SSD copes with knocks much better, but the charging port and hinges don’t.

After an interrupted Windows or BIOS update, use the recovery environment options above. A BIOS update interrupted by a power cut is more serious: on some models the board has to be reprogrammed in a repair shop.

After a liquid spill, don’t try to turn it on at all. Current running through a wet board does more harm than the liquid itself. The steps for the first few minutes are in the article on liquid spilled on a laptop.

What not to do when your laptop won’t start

A few mistakes we see often that turn a small problem into a big one:

  • Don’t switch it on and off dozens of times in a row. If the disk is failing, every attempt puts more strain on it.
  • Don’t open the case with the charger plugged in, or without disconnecting the internal battery.
  • Don’t use a charger with a different voltage just because the plug fits.
  • Don’t reinstall Windows before you’ve saved your data. Reinstalling wipes the system disk.
  • Don’t let just anyone “try something” on a laptop with important data without saying so up front.

What happens to your files

The good news: on most laptops that won’t start, the files are intact. The fault is in the power, the screen or the board, and the disk is fine. A technician can take the disk out and copy the data onto another drive, even if the laptop itself can’t be repaired.

There are two exceptions. Laptops whose storage is soldered directly to the motherboard, where getting the data off depends on repairing the board. And disks encrypted with BitLocker, where nobody can read the data without the key.

If the repair only replaces a part, your data stays where it is. If Windows needs reinstalling, you need a copy first. How to do a clean reinstall once your data is safe is in the article on reinstalling Windows.

Frequently asked questions

Why does my laptop only work when it’s plugged in?

The battery no longer holds a charge, or the laptop no longer recognises it. It may be fully drained after a long break, worn out or faulty. Leave it charging for a while; if it still shuts off when you unplug the charger, the battery needs checking and probably replacing.

My laptop turns on and then shuts off after a few seconds. What does that mean?

If it shuts off before the logo, the cause is often power or the motherboard. If it shuts off after a while in use, especially under load, check for overheating: a stopped fan or a dust-clogged heatsink leads to protective shutdowns. Either way, don’t force repeated starts.

Is a motherboard repair worth it?

It depends on the laptop’s age and what the board costs for that model. Some faults can be fixed by replacing just the burnt component, others need the whole board replaced. The page on how much it costs to get a laptop serviced helps you weigh up the decision.

Can I recover my data if the laptop can’t be repaired at all?

Usually yes, as long as the disk isn’t soldered to the board and isn’t encrypted without the key. The disk is taken out and read on another computer. Tell the technician from the start that your data is the priority.

When to call a technician

If the laptop still won’t start after the checks above, it’s time for a diagnosis. The same goes if:

  • no light comes on with a charger you know for sure works;
  • the picture appears on an external monitor but not on the laptop screen;
  • you hear clicking or strange beeps;
  • it’s been dropped, got wet or smelled of burning.

When you bring the laptop in, bring the charger too, because it’s part of the diagnosis. Tell us what you’ve already tried from the list above and what happened before the laptop stopped starting: an update, a fall, a storm with a power cut. If you know BitLocker is on, check in advance that you can find the recovery key in your Microsoft account. All of this shortens the diagnosis and reduces the risk to your data.

The symptom alone doesn’t say which part has failed, and that’s what drives the price, as we explain in how much it costs to have a laptop serviced. We handle diagnosis and repair through our laptop and PC service for home users, and if there’s important data on it, we copy that first.

Tell us what is not working

Describe the problem in a few lines. We reply with what we think needs doing and what it would cost.

Describe the problem