Printer Not Printing? What to Check Before Calling for Repair
Printer offline, jobs stuck in the queue or pages coming out streaky? The fixes that solve most home printing problems, in order, and when it's a fault.
Published Updated 10 min read
Printers have a habit of failing exactly when you need a page urgently. The good news is that many printing problems aren’t faults at all: the printer has lost its connection to the computer, a job is stuck in the queue, or a cartridge isn’t being recognised. Work through the steps below in order, starting with the simplest. Most of the time you won’t get halfway down the list.
Read what the printer is telling you
Look at the printer before you look at the computer. Its screen or its blinking lights usually say what’s bothering it:
- Out of paper, or paper loaded crooked in the tray.
- A cover is open, including the cartridge cover or the rear access door.
- A paper jam, sometimes just a small torn piece left inside.
- Ink or toner running low. Some models refuse to print with one empty colour, even in black and white.
- An error code, which you can look up in the manual or on the manufacturer’s website for your exact model.
Blinking light patterns mean different things on different models. The manual has a table of them, and you can usually download it as a PDF from the support page for your model.
If the printer won’t turn on at all, with no lights, test the socket with another device and check the power cable at both ends. On some models the external power adapter has its own LED. If there’s still no sign of life after that, it’s a power fault and there’s no point searching through your computer settings.
Restart in the right order
It sounds too simple. It often works. Turn off the printer, turn off the computer, then switch the printer back on first and wait until it finishes its start-up noises. Only then turn the computer on. If the printer is on Wi-Fi, restart the router as well.
Use the printer’s power button rather than pulling the plug. When an inkjet shuts down normally it parks and caps the print head so it doesn’t dry out.
Printer showing as “offline”
If the printer connects over Wi-Fi, check on its screen or in its menu that it’s actually on the network. After you change your router or your Wi-Fi password, the printer stays set to the old network and has to be connected again.
In Windows, go to Settings → Bluetooth & devices → Printers & scanners and check that you’re printing to the right printer. Sometimes two copies of the same printer appear, and one of them is offline. Remove the one that doesn’t work and set the other as your default printer.
Other common causes:
- The printer’s network address changed after the router restarted. In your router’s settings page you can reserve a fixed address for it (a DHCP reservation) so it doesn’t happen again.
- The computer is on the guest network and the printer is on the main one. Guest networks can’t see devices on the main network.
- The printer joined the 5 GHz or the 2.4 GHz band and the router keeps the bands separate. Many printers only work on 2.4 GHz.
- The printer’s power-saving mode switched off Wi-Fi. Some models have a menu option to keep it on all the time.
If you’ve just replaced your router, the guide to setting up a new router shows how to move your devices across without reconfiguring every one of them.
Print queue stuck and driver problems
Jobs stuck in the print queue
When one job gets stuck, every job after it waits. Open the printer from Printers & scanners, choose Open print queue and cancel everything in it. If the jobs won’t disappear, restart the computer and try again.
If the queue still won’t clear after a restart, restart the Windows print service:
- Press Windows + R, type
services.mscand press Enter. - Find Print Spooler in the list.
- Right-click it and choose Restart.
That usually clears the stuck jobs. If they’re still there, stop the service, delete the files in C:\Windows\System32\spool\PRINTERS and start the service again.
The Windows printer troubleshooter
Windows has a built-in troubleshooter for printers that checks the print service, the driver and the connection by itself. In Windows 11 you’ll find it under Settings → System → Troubleshoot → Other troubleshooters, next to Printer. It won’t fix everything, but it fixes enough of the simple problems to be worth running before the longer steps.
The driver
Windows usually installs a basic driver on its own. It prints, but it sometimes doesn’t know about scanning or quality settings. If the printer starts behaving oddly after a Windows update, download the driver from the manufacturer’s website for the exact model written on the printer.
When nothing else works, remove the printer completely and add it again:
- In Printers & scanners, select the printer and click Remove.
- Restart the computer.
- Install the driver or the full software package from the manufacturer’s website.
- Add the printer again with Add device.
Steer clear of sites offering “drivers for any printer”. They often come bundled with unwanted software.
Printing from your phone
Most Wi-Fi printers print straight from a phone without any app, as long as the phone and the printer are on the same network:
- iPhone and iPad use AirPrint. Tap Share → Print and pick the printer.
- Android has a print service built in. On many phones the printer shows up directly in the Print menu. If it doesn’t, install the manufacturer’s plugin from the app store.
If your phone can’t find the printer, the cause is almost always the network: the phone is on mobile data or the guest network, or the printer has dropped off Wi-Fi.
If you have no router, or the printer refuses to join your network, many models offer Wi-Fi Direct. The printer creates its own small network and you connect to it directly from your phone or laptop. The network name and password usually appear on the printer’s screen or on a configuration page you can print from its menu. It’s a good fix for an urgent print, less so for everyday use: while you’re connected to the printer, your phone has no internet over Wi-Fi.
Scanner not working
On all-in-one printers, printing and scanning often rely on separate software. If the printer prints but your computer can’t find it for scanning, the usual cause is the basic driver Windows installed, which doesn’t include the scanner. Install the full package from the manufacturer’s website.
For a quick scan without extra software, the Windows Scan app from the Microsoft Store works with most scanners. On your phone, many printer brands have their own app that scans straight to PDF.
Streaky, blank or wrong-colour pages
On inkjet printers, streaks and missing colours usually come from dried print heads, especially if the printer has sat unused for a few weeks. From the printer’s menu or its software on your computer, run print head cleaning and then a test page. You may need two or three runs, and each one uses ink.
If several cleanings don’t fix it, leave the printer for a few hours and try again. Sometimes the ink needs time to reach the nozzles.
Completely blank pages usually mean the protective tape is still on a new cartridge, the cartridge is empty, or the print head is fully blocked.
Slanted text or crooked lines are fixed by print head alignment, in the same maintenance menu.
On laser printers, streaks that repeat down the page can come from the toner or from the drum unit, which is replaced separately on many models. Faded pages usually mean the toner is running low. Take it out and shake it gently from side to side to get a few more pages until the new one arrives.
Original or compatible cartridges
Compatible cartridges cost less and many work well, but there are risks. The printer may not recognise them, some firmware updates can block them, and quality varies a lot from one maker to another. If the printer rejects a new cartridge, first check that you removed the protective tape and that you bought the exact cartridge code, which is printed on the old one or in the manual.
A freshly fitted cartridge can take a few minutes while the printer prepares it. Don’t keep taking it out and putting it back during that time. If the printer still shows a cartridge error, gently wipe the gold contacts on the cartridge with a dry, lint-free cloth and restart the printer.
The differences, the risks and how to work out cost per page are covered in detail in our guide to compatible vs original ink cartridges.
Paper jams that keep happening
An occasional jam is normal. Frequent ones usually have simple causes:
- Too much paper in the tray, or the tray filled above the maximum line.
- Damp or curled paper stored in a humid room. Keep the ream in its wrapper.
- Paper that’s too thick for the printer. Check the manual for the weights it accepts.
- Tray guides set too tight or too loose.
- Dirty or worn feed rollers. You can clean them with a cloth lightly dampened with water. If they look shiny and smooth, they’re worn.
Envelopes, labels and photo paper usually go in the manual feed tray or the rear slot, one or a few at a time, not in the main tray. Check the manual for which side prints and which way round the envelope goes. Only use full label sheets: a label that peels off inside the printer can cause a serious jam.
Pull jammed paper out gently in the direction the paper normally travels. A torn piece left inside causes new jams.
Frequently asked questions
Why does my printer only print in black and white when I have colour ink?
Check the print settings in the program you’re printing from. Many have a “Grayscale” option ticked. If the settings are right, print a test page: a missing colour points to a blocked print head or an empty cartridge.
My printer scans but won’t print. What does that mean?
The computer can see the printer, so the connection is fine. The problem is usually in the print queue, the driver or the consumables. Check the queue and the ink levels, then reinstall the driver.
Is an old printer worth repairing?
It depends on the fault. A jam, dirty rollers or a driver problem are easy to sort out. A failed print head or a faulty mainboard can cost almost as much as a new printer. How repair costs are generally worked out is explained in how much it costs to have a laptop serviced; the logic is the same.
Can I move my printer to a new computer?
Yes. Install the driver from the manufacturer’s website on the new computer and add the printer from Settings. Whatever else needs moving when you change computers is in the guide to transferring your data to a new PC.
Why does it take so long before printing starts?
Large documents with lots of photos, or PDFs scanned at high resolution, take a while to send, especially over Wi-Fi. A laser printer may also be warming up, and an inkjet may be cleaning its heads. If the delay happens with every document, check the printer’s Wi-Fi signal and its driver.
When it’s time for a repair
If paper keeps jamming in the same spot, the printer makes new noises, or it shows an error code that won’t clear after a restart, you’re probably looking at a mechanical problem. Sometimes the repair costs nearly as much as a new printer. When that’s the case, we’ll tell you plainly that it isn’t worth it.
We set up printers on computers, phones and Wi-Fi, and we source the right cartridges or toner for your model. You’ll find the details on our home IT services page.