Skip to content
TECH Consult

New Router Setup, Step by Step After Installation

How to connect and set up a new home router, which passwords to change, which security settings to switch on and how to move devices from the old one.

Published 10 min read

You’ve bought a new router, taken it out of the box and you’re looking at the cables. Most routers today have a setup wizard that walks you through in a few minutes, but the wizard doesn’t do everything. It leaves convenient, insecure settings switched on, and it knows nothing about the printer, TV or cameras in your home. Below are the new router settings in the order worth doing them, from the cable to the guest network.

Where the new router plugs in

Before any settings, work out what your internet provider gave you. There are three common situations:

  1. The provider gave you only a fibre terminal or a modem, with no Wi-Fi. Your new router connects with a network cable from its WAN port (or Internet port, usually a different colour) to that terminal.
  2. The provider gave you a router with Wi-Fi and you want to replace it or add to it. You have a choice here. Either the provider’s router goes into “bridge” mode and your router takes over everything, or the new router works only as an access point and the provider’s box stays the router.
  3. Your internet arrives through a cable straight out of the wall. The router connects directly, from its WAN port.

Avoid having two routers doing the same job one after the other without knowing it. It’s called “double NAT”, and it sometimes breaks online gaming, video calls or remote access to cameras. If you keep the provider’s router, ask them to put it in bridge mode, or set the new one up as an access point.

Connection type: PPPoE or automatic

The router needs to know how to sign in to your provider. The setup wizard will ask for the connection type:

  • Dynamic IP (DHCP, automatic): the simplest. The router gets its address by itself. Common with cable and with many fibre connections that have a separate terminal.
  • PPPoE: needs a username and password from your provider. You’ll find them in your contract or on your bill, or you can ask customer service. Without them, the router has no internet.
  • Static IP: rare at home. The provider gives you the address and the other details.

Some providers also require a VLAN number. If the internet light on the new router stays off after setup, ask the provider exactly which settings they need for a router of your own. If their support line doesn’t handle English, it helps to have these terms written down: PPPoE, VLAN, bridge mode.

First login and the admin password

The label under the router shows the address of the admin page (usually something like 192.168.0.1, 192.168.1.1 or a page name) and the default login details. Many newer models can also be set up from a phone app.

The first thing to do: change the admin password. This is the password that protects the router’s settings, not the Wi-Fi password. Make it long and unique, and write it down somewhere safe. On older routers the default password is sometimes the same on every unit of that model, and anyone can look it up online.

If the router asks you to create an online account with the manufacturer, read what that account does. It usually allows remote management from the app. That’s convenient, but it means the router’s settings can be reached from the internet too, protected only by the account password. Turn on two-step verification for it if it’s available.

Network name and Wi-Fi password

The network name (SSID) can be anything. Avoid your surname, your address or your flat number. It doesn’t protect you from anything, but there’s no need to tell the neighbours whose network it is.

For security:

  • Encryption: choose WPA3 if all your devices support it, or WPA2/WPA3 (mixed mode) if you have older devices too. Don’t use WEP, and don’t leave the network open.
  • Password: long, easy to read out to guests, hard to guess. A phrase of four or five unrelated words beats a short word with numbers.
  • WPS: turn it off, especially the PIN version. It’s the button that lets devices connect without a password, and it has had known security problems. If you want to connect a printer with WPS, turn it on just for that moment.

2.4 GHz and 5 GHz networks

Most routers broadcast on two bands, and the newest ones on a third, at 6 GHz. In short:

  • 2.4 GHz reaches further and gets through walls better, but it’s slower and crowded in blocks of flats.
  • 5 GHz is much faster but covers less ground.
  • 6 GHz, where available, is faster and less crowded still, but with even shorter range and only for newer devices.

You have two ways to set this up. With one name for all bands (band steering), the router moves each device to the right band by itself. It’s the convenient option and works well on most recent models. With separate names, such as “Home” and “Home-5G”, you choose. That helps when an old device, a smart plug or a printer only connects on 2.4 GHz and gets confused during setup.

There’s more on choosing a band and placing the router in our guide to fixing weak home Wi-Fi.

Firmware and security settings

Automatic updates

The router has its own software (firmware), which gets security fixes. Straight after setup, look in the menu for the update section (Firmware Update, System or Administration) and install the latest version.

If the router offers automatic updates, switch them on. A router left for years without updates is an easy target, and attacks on home routers aren’t visible. The internet keeps working; your traffic may just be going where it shouldn’t.

Also check how long the manufacturer promises updates for that model. A very cheap or very old router may no longer get anything, in which case it’s worth replacing.

Security settings worth checking

A few menu options to check once:

  • Remote management (management from the WAN side): turn it off if you don’t need it. If you do use it, prefer the manufacturer’s app with two-step verification.
  • UPnP: lets programs and devices in your home open ports in the router by themselves. It helps with games consoles and online games, but it’s also a risk if a device is compromised. If you have no consoles or programs that need open ports, you can turn it off.
  • The router’s firewall: leave it on.
  • Ping from the internet and other services exposed to the outside: off.
  • The list of connected devices: look at it now and then. A device you don’t recognise could be a neighbour who has found out your password.

Guest network and smart devices

Almost every new router has a guest network. Turn it on and give guests that password, not the main one. Their devices get internet but can’t see the computers, printer or drives on your network.

The guest network is also a good home for “smart” devices: bulbs, plugs, robot vacuums, cheap cameras. Many of them rarely get updates. If one is compromised, it’s better that it isn’t on the same network as the laptop you use for online banking. Check first that the device doesn’t need to see your phone on the local network, though, or its app won’t find it any more.

The same principle applied at work is explained in our guide to office guest Wi-Fi.

Moving devices over from the old router

The biggest headache with a new router is reconnecting every device: phones, TVs, the printer, the boiler, the cameras. One simple trick saves you the trouble: give the new network exactly the same name and password as the old one, with the same encryption. Most devices reconnect by themselves without you touching anything.

If you’re using the chance to change the password, make a list of every device on Wi-Fi. The ones without a screen, such as the printer, a smart plug or the boiler, usually reconnect from their app or with a button.

For the printer, a DHCP reservation in the router is worth setting up. It gives the printer a fixed address, so computers don’t “lose” it after a restart. You’ll usually find the option in the DHCP or LAN settings, under “Address Reservation”. If the printer shows as offline after you change routers, our guide to a printer not printing has the steps.

Don’t throw the old router away before resetting it to factory settings with the small button on the back, so your network password doesn’t stay stored in it.

Parental controls on the router

Many routers have filters for children: schedules, website blocking, pausing certain devices. They’re useful as a first layer, because they apply to every device in the house, including the ones your children’s friends bring. How to combine them with settings on phones and computers is covered in our guide to parental controls.

Final checks

Once the settings are done, spend another quarter of an hour making sure everything works properly. It’s much easier now than in a month’s time, when you no longer remember what you changed.

  1. Test the speed over a cable, with a laptop plugged straight into the router. Compare it with your plan. If it’s far below, the problem is the connection or the provider’s settings, not the Wi-Fi.
  2. Test the speed over Wi-Fi in every room, with your phone, where you actually use it: on the sofa, at the desk, in bed. Note the rooms with poor results.
  3. Check the devices without a screen: the printer, TV, cameras, boiler. Turn each one on and confirm it connects.
  4. Restart the router once and check that everything comes back by itself. Some wrong settings only show up after a restart.
  5. Save a copy of the configuration, if the router has the option (Backup Settings or Save Configuration). If it ever needs resetting, you restore everything in one click.

Finally, write down, on a sheet kept by the router or in a password manager: the network name, the Wi-Fi password, the admin password, the PPPoE details and the guest network password. That way you won’t be hunting for them next time something breaks.

Frequently asked questions

Do I need to tell my internet provider when I change routers?

Usually not, as long as you have the connection details (such as the PPPoE username and password). On some connections the provider has to put their equipment into bridge mode or give you special settings. A call to customer service sorts it out quickly.

Will a new router make my internet faster?

It won’t raise the speed of your plan, but it can let you actually use it. An old router without 5 GHz, or with slow ports, can be the bottleneck, especially on fast fibre plans. Test the speed over a cable before and after.

Where is the best place to put the router?

As central as possible, up high, out in the open, away from metal and large appliances. If the fibre comes in at one end of the house, running a network cable to a central spot helps a lot. For large homes, see our comparison of mesh Wi-Fi vs an extender.

How often should I restart the router?

A healthy router doesn’t need regular restarts. If you have to restart it often to keep the internet working, that points to old firmware, overheating or an outdated model. A restart is still the first thing to try when something isn’t working.

Can I get internet without paying for a plan?

For questions about free or mobile connections, see our answer on how to get free internet on your laptop.

When a technician makes it easier

Get help if your provider needs special settings (VLAN, bridge mode), if you have a large home with several access points, if you want separate networks for guests and smart devices, or if the printer or cameras stopped working after the router change.

We choose the right router for your home, set it up, move your devices over and check the signal in every room. Details are on our home IT page.

Tell us what is not working

Describe the problem in a few lines. We reply with what we think needs doing and what it would cost.

Describe the problem