Skip to content
TECH Consult

Weak Wi-Fi at Home? What to Check Before Buying a New Router

Signal won't reach the bedroom, or the internet drops in the evening? Simple checks that fix many home Wi-Fi problems without spending anything.

Published Updated 10 min read

When Wi-Fi doesn’t reach every room, the first thought is a new router or a booster. Sometimes that’s exactly what you need. But often the problem is where the router sits, a setting, or a single device dragging the whole network down. Below are the checks that cost nothing, in the order worth doing them, and the signs that tell you it really is time for new equipment.

Check the wired speed first

Connect a laptop to the router with a network cable and run a speed test. If the speed is far below what you pay for even over the cable, the problem is with your internet provider, not your Wi-Fi. Call them before you buy anything.

If the wired speed is good and only Wi-Fi is slow, read on.

A few details make the test fair:

  • Close downloads, updates and streaming on the laptop while you test.
  • Run the test two or three times, at different times of day. Good speed in the morning and poor speed in the evening, even over the cable, points to a congested network at the provider.
  • Check that the laptop has a fast network port. An old USB adapter can limit the speed on its own.

Weak Wi-Fi or slow internet: how to tell them apart

The two problems look the same on your phone, but they have different fixes. A few questions help you separate them:

  • Is it bad everywhere, or only in some rooms? Only in some rooms means Wi-Fi coverage. Everywhere, including next to the router, points to the connection or the router.
  • Is it bad on every device, or just one? A single slow laptop next to the router usually has a problem of its own: an old Wi-Fi adapter, a driver, power-saving settings.
  • Does the page not load at all, or load slowly? If the phone shows full signal but won’t open anything, the problem is usually the internet connection or the router, not the signal.
  • Does it happen at certain times? In the evening, when everyone in the building is home, both the surrounding Wi-Fi networks and the provider’s network are busier.

Where the router sits

Wi-Fi signal struggles through thick walls, metal and water. A router placed in a corner of the hallway, on the floor, in a cupboard or next to the fridge loses a lot of its coverage.

  • Put it as close to the middle of the home as you can, at shelf height.
  • Keep it in the open, not shut in a cupboard or behind the TV.
  • Keep it away from large mirrors, aquariums, radiators and fuse boxes.
  • If it has antennas, point one vertically and one horizontally.

Moving the router two or three metres can make a big difference to the signal in the rooms at the far end.

If the fibre comes into the home in the worst possible corner, ask your provider to move the terminal, or run a network cable from it to a more central spot. A flat cable along the skirting board is easy to hide.

Cables matter too

If the wired test comes out poor, don’t blame the provider straight away. An old network cable, crushed under a door or with a broken plug, can limit the speed by itself. Try another short, new cable directly between the laptop and the router. Check the cable between the fibre terminal and the router as well: all of your home’s internet goes through it.

2.4 GHz or 5 GHz

Most routers broadcast two networks. The 2.4 GHz one reaches further and gets through walls better, but it’s slower and more crowded. The 5 GHz one is much faster but covers less.

If your phone connects on 2.4 GHz right next to the router, you’re losing speed. Some routers let you give the two networks different names so you can choose yourself. Others use one name and move devices between bands automatically, which works well on recent models.

On a Windows laptop, you can see the band in use under Settings → Network & internet → Wi-Fi → [your network] properties, next to “Network band”. On a phone, it usually appears in the Wi-Fi network details.

Neighbours and channels

In a block of flats, dozens of nearby networks use the same channels. Most routers choose their channel automatically, but some get stuck on a crowded one. Restarting the router usually makes it search again. On 2.4 GHz, channels 1, 6 and 11 are normally used because they don’t overlap.

There are many more free channels on 5 GHz, so congestion matters less. That’s one more reason to use 5 GHz wherever the signal reaches.

Channel width matters too. On 2.4 GHz, a wide channel in a crowded building does more harm than good. If your router lets you choose, leave 2.4 GHz on the narrowest width and use wide channels only on 5 GHz.

One device can slow down everything

Wi-Fi is shared between every device in the home. A few common situations slow everyone down:

  • An old device far from the router. With a weak signal, it transmits slowly and occupies the network for longer than one close to the router.
  • Backups and cloud sync. A laptop uploading thousands of photos to the cloud, or a security camera streaming video nonstop, can saturate the connection, especially the upload side.
  • Big updates. Consoles and computers sometimes download tens of gigabytes at once.
  • An unknown device. Check the list of connected devices on the router’s admin page. If you see something you don’t recognise, change the Wi-Fi password.

When the network suddenly slows down, try switching off the heavy users one at a time and see whether the speed comes back.

The laptop or phone could be the problem

If only one device has trouble, check that device:

  • Forget the network and reconnect. On a laptop, in the Wi-Fi settings, go to Manage known networks → Forget, then connect again with the password.
  • Update the Wi-Fi card driver from the laptop maker’s website, especially after a major Windows update.
  • Power saving. In power-saving mode, some laptops reduce the power of the Wi-Fi card. Test with it plugged in.
  • Old Wi-Fi cards. A ten-year-old laptop may not support 5 GHz at all. A modern USB adapter fixes that cheaply.

A laptop that’s slow in general, not only online, usually has other causes. Our guide to fixing a slow laptop covers them.

The router from your provider

Routers supplied by providers are often basic models. Log in to the admin page and check for firmware updates. If it’s more than five or six years old and has no 5 GHz, it probably really is time for a new one.

Before you buy, ask the provider whether they can swap the equipment for a newer model. If you get a router of your own, find out which settings the connection needs (PPPoE, VLAN) and whether their router can switch to bridge mode. The setup steps are in our guide to new router setup.

The router overheats or freezes

A router you have to restart often to keep the internet working usually has one of three problems: old firmware, overheating or simply age. Touch it: if it’s very hot, move it somewhere ventilated, not shut in a cupboard or stacked on other devices. Then check for firmware updates. If it keeps freezing after both, the router has probably reached the end of the road, especially if it’s many years old.

A restart is still a useful step when something isn’t working, but it shouldn’t become a daily routine. A healthy router runs for weeks without being touched.

When you need extra equipment

If the signal still doesn’t reach after all this, you have three options, from the most stable to the simplest:

  1. A second access point connected by cable. The best coverage, but it needs a cable run to that spot.
  2. A mesh system. Two or three units that form a single network across the whole home. Good for large homes or several floors.
  3. A Wi-Fi extender. Cheap, but a basic extender can halve the speed, because it receives and sends on the same channel.

The differences between them, how to position them and when each is worth it are explained in detail in our comparison of mesh Wi-Fi vs an extender.

Network security

While you’re in the router settings, change the default admin password, use WPA2 or WPA3 encryption and give the network a long password. An open network can be used by anyone nearby, including for things you’d be held responsible for.

Turn off WPS if you don’t use it, and turn on the guest network for visitors and for the smart devices in your home. A neighbour using your network doesn’t just slow your internet; they’re also on the same network as your computers.

If you’ve given your Wi-Fi password to lots of people over the years, change it once while you’re doing these checks. You’ll need to reconnect the devices at home, but you’ll get rid of every phone that still remembers it. From then on, give guests the guest network password, which you can change any time without touching the rest of the home.

Frequently asked questions

Why is Wi-Fi fine during the day and bad in the evening?

In the evening more nearby networks are active, and the provider has more users on the same line. Test over a cable in the evening: if the speed drops there too, it’s a provider problem. If only Wi-Fi drops, move devices to 5 GHz and restart the router so it picks a different channel.

Is a router with more antennas worth buying?

The number of antennas doesn’t automatically mean better coverage. What matters is the Wi-Fi standard, the quality of the router and, above all, where you put it. A good router placed centrally beats one with lots of antennas hidden in a cupboard.

Do microwaves really interfere with Wi-Fi?

A microwave oven works in the same frequency range as the 2.4 GHz network and can disrupt the signal while it’s running, especially if the router or phone is close to it. It has no effect on 5 GHz.

Can I get internet on my laptop without home Wi-Fi?

Yes, through your phone’s hotspot or a mobile router with a SIM card. How to choose and what’s involved is covered in our answer on whether you can pay for internet for your laptop.

How many devices can a router handle?

It depends on the model. Newer routers handle dozens of devices at once much better than older ones. If you have lots of smart devices and the network freezes often, a newer router or a mesh system helps.

What does “Connected, no internet” mean?

Your phone or laptop is connected to the router, but the router itself has no internet. Look at the lights on the router and the fibre terminal: a red or unlit “Internet” or “PON” light points to a problem on the line. Restart the terminal, then the router, and if it doesn’t come back, call your provider.

When to call a technician

Get help if you’ve been through every step and the signal still doesn’t reach, if your home has several floors, if you want cable run to distant rooms, or if the provider’s router has to be set up alongside one of your own.

We check the signal in every room, move or set up the router, install access points or a mesh system and check the result with you. Details are on our home IT page.

Tell us what is not working

Describe the problem in a few lines. We reply with what we think needs doing and what it would cost.

Describe the problem