Skip to content
TECH Consult

Small Office Network Setup: From Router to Wi-Fi

How to set up a small office network: router, switch, cabling, Wi-Fi for staff and guests, security, and what to document so it stays manageable.

Published 10 min read

In many small offices, the network has grown bit by bit: the router from the internet provider, a switch bought in a hurry, a Wi-Fi extender sitting on top of a cupboard. It works, until it doesn’t and nobody knows why. Below you’ll find what a small office network is made of, how to plan one, how to secure it, and the signs that tell you the network is to blame when things slow down.

What an office network is made of

A small business network usually has a few basic pieces:

  • The router or firewall. It connects the office to the internet and decides what passes between the internal network and the outside. Remote access is set up here too, if you have it.
  • The switch. It distributes network cable to computers, printers, the NAS and IP phones. A “managed” switch lets you split the network into separate segments and monitor its ports.
  • Wi-Fi access points. They broadcast Wi-Fi around the office. Unlike a home router, they’re designed to work together as one network.
  • Cabling. The network sockets in the walls, the cables in the ceiling or skirting, and the panel where they all meet (the patch panel).
  • The network cabinet (rack). A closed, ventilated place for the router, the switch and possibly the NAS and UPS.

Not every office needs all of these. An office of a few people can run on a good router and a small switch. What matters is that each piece was chosen, not inherited.

Wired or Wi-Fi in the office

Wi-Fi is convenient, but cable is more stable. The practical rule for an office:

  • On cable: desktop computers, printers, the NAS, the server, Wi-Fi access points, IP phones.
  • On Wi-Fi: laptops that move between rooms, phones, tablets, guests.

A wired computer doesn’t compete with anyone for signal and doesn’t drop off when someone closes a metal door. If staff work with large files on the NAS or server, the difference shows every day.

When you fit out or renovate the office, that’s the time to run cables. Put one spare network socket at every desk. It costs little while the work is going on and a lot once the walls are painted.

How to plan your office network

Before you buy any equipment, make a simple list:

  1. How many people and how many devices. Computers, laptops, phones, printers, security cameras, smart devices (thermostats, the meeting room TV).
  2. Where they work. A sketch of the office with desks, the meeting room and reception. Wi-Fi is planned room by room, not by square metre.
  3. What crosses the network. Files on the NAS, networked accounting software, video calls, printing. That tells you how fast the switch needs to be and how much internet bandwidth you need.
  4. Who comes in from outside. Clients, contractors, couriers asking for Wi-Fi.
  5. Who works from home. If staff reach office files remotely, the router needs to support a VPN.

That list helps both you and the technician preparing your quote. Without it, you get whatever equipment happened to be in stock.

Office Wi-Fi that actually covers the office

The most common complaint in offices is weak Wi-Fi in certain rooms. The cause is usually one of these:

  • a single router in a corner, trying to cover the whole floor;
  • Wi-Fi extenders that halve the speed and create separate networks;
  • thick walls, coated glass or metal cabinets between the router and the people using it;
  • too many people on the same access point.

The usual fix is two or more access points, cabled back to the switch, broadcasting the same Wi-Fi network. Laptops hand over from one to the next as you move around. Mount them on the ceiling or high on a wall, close to where people sit, not in the network cabinet.

How the access points are configured matters too. A few rules that solve a lot of problems:

  • use the same Wi-Fi network (same name and same password) on every access point, so laptops can move between them;
  • keep newer devices on the 5 GHz band, where there’s less interference, and leave 2.4 GHz for older devices and longer distances;
  • don’t turn the power up to maximum on every access point, or laptops stay stuck to a distant one instead of moving to the nearest.

For Wi-Fi security, use WPA2 or, if all your devices support it, WPA3. Don’t give the staff network password to guests. They need a separate network, as described in our article on office guest Wi-Fi.

Separate your networks

A “flat” network, where everything connected can see everything else, is the simplest and the riskiest. A visitor’s laptop, a cheap IP camera or a smart TV ends up on the same network as the accounting server.

With a managed switch and a router that supports them, you can split the network into segments (VLANs):

  • Staff: company computers and laptops, with access to the NAS and printers.
  • Guests: internet only, with no access to anything in the office.
  • Devices: cameras, smart devices and perhaps the printers, kept apart from the computers.
  • Servers: the NAS and server, reachable only from where they need to be.

You don’t need all of this from day one. Separating guests from staff is the first step, and even simpler routers can do it.

Network security, step by step

A few settings that often get forgotten and matter a lot:

  1. Change the admin password on the router, the switch and the access points. Default passwords are public, printed in the manufacturers’ manuals.
  2. Update the firmware. Routers and access points get security fixes. Check for updates in their admin interface, or turn on automatic updates.
  3. Switch off what you don’t use. WPS, remote administration from the internet, and UPnP if you don’t need it.
  4. Don’t open ports at random. Every port opened to the internet (for a camera, for remote desktop) is a door. For access from home, use a VPN, not open ports. We go into detail in remote access and VPN for employees.
  5. Keep the network cabinet locked. Anyone with physical access to the switch can plug anything in.
  6. Write down who has the passwords. Especially if the network was set up by someone who no longer works with the company.

Document and protect the equipment

A well-built network only stays good if someone knows how it’s built, and if its equipment doesn’t stop at the first power or internet problem.

Documentation

Network documentation doesn’t have to be complicated. One page or a spreadsheet is enough, with:

  • each piece of equipment, its model, its location and its IP address;
  • which wall socket goes to which switch port;
  • the Wi-Fi networks and who each one is for;
  • fixed addresses (NAS, printers, server);
  • the internet provider’s contact details and your customer number;
  • where the admin passwords are kept.

When something goes wrong, documentation cuts the search from hours to minutes. And when you change technicians, the new person doesn’t start from zero.

Power and ventilation

The router and switch are small and easy to forget, but if they stop, the whole office stops. Two things extend their life:

  • Protected power. A small UPS keeps the router, switch and NAS running through a short power cut and shuts them down cleanly during a long one. See our article on UPS power outage protection.
  • Ventilation. Equipment shut in a cabinet with no airflow runs hot and fails sooner. Leave space between devices and don’t pile folders on top of them.

If a NAS with the company’s data also lives in the cabinet, our article on a NAS for a small office explains what else to keep in mind.

A second internet connection

When the internet goes down, many offices grind to a halt: email, cloud documents, online invoicing software, IP phones. If your company can’t manage even a few hours without internet, a backup connection is worth having.

The usual options are a second contract with another provider on a different technology (fibre plus a mobile connection, for example), or a modem with a data SIM used only when needed. Some business routers switch to the backup connection by themselves when the main one fails and switch back once it returns. Choose a second provider that doesn’t use the same infrastructure in your building, or one set of roadworks will take out both.

Signs the network is the problem

Not every slowdown comes from the network, but a few patterns point to it:

  • Everything slows down at the same time of day, for example in the morning or when the backup starts.
  • One desk or one room has problems and the rest don’t.
  • Wired computers run fine and laptops on Wi-Fi don’t.
  • The printer or NAS “disappears” from the network and comes back after a restart.
  • Video calls drop even though a speed test looks fine.

Note when the problem happens, where and on which devices. With that information, a technician finds the cause much faster.

Frequently asked questions

Is the router from my internet provider good enough for an office?

For a very small office, sometimes. Problems start when you want separate guest networks, a VPN for staff or control over updates. At that point you usually put your own router behind the provider’s.

What is a managed switch, and do I need one?

A managed switch can be configured: separate networks on different ports, monitoring, priority for phones. An unmanaged switch just distributes the cable. If you want to keep cameras or guests apart from the computers, you need a managed one.

How many Wi-Fi access points do I need?

It depends on the walls, the shape of the office and how many people work on Wi-Fi. A technician usually measures the signal in each room before recommending a number. Several lower-power access points generally do better than one very powerful one.

Can I use home networking equipment in the office?

It works for small offices, but it has limits: few security settings, less frequent updates, and no central management for several access points. Once you get to a few dozen devices, business equipment is usually easier to maintain.

Is network setup part of an IT maintenance contract?

Usually, yes: router maintenance, firmware updates and fixing connection problems are part of ordinary IT maintenance. Our page with an example of an IT service shows what that kind of job looks like in practice.

What do I do with the router my internet provider gave me?

You can keep it as a modem only and put the company router behind it, handling Wi-Fi, separate networks and the VPN. Ask the provider to switch their device to “bridge” mode, so you don’t have two routers getting in each other’s way.

When to call a technician

If your network grew without a plan, nobody has the router password, or the Wi-Fi drops every day in the same places, an assessment is worth it. We look at the equipment, measure the signal, check the security settings and leave you written documentation.

Office networks are part of the IT maintenance we provide for small and medium businesses, from the initial setup to monthly upkeep.

Tell us what is not working

Describe the problem in a few lines. We reply with what we think needs doing and what it would cost.

Request a quote