Office Guest Wi-Fi: How to Keep Visitors Off Your Business Network
Why you shouldn't give clients your company Wi-Fi password, how to set up a guest Wi-Fi network on your router and which security settings to check.
Published 9 min read
A client waiting in reception asks for the Wi-Fi password. A colleague gives it out, because it’s polite and because there’s no other network. From that moment, the client’s phone is on the same network as the server, the printer and the accountant’s computer. A separate guest Wi-Fi network solves the problem: visitors get internet, but they can’t see anything on the company network. Below you’ll find why it’s worth doing, how to set it up on the router and which security settings to check.
Why you shouldn’t give out the main network password
Your company Wi-Fi isn’t just internet access. It’s also the route to:
- shared folders and the server holding company documents;
- printers and scanners, which often have their own web interface with the factory password;
- the NAS with your backups;
- security cameras and the alarm system, if they’re connected;
- the router’s admin interface.
A stranger’s device on the main network can see all of these. The guest doesn’t need bad intentions. It’s enough for their phone or laptop to have a virus that scans the network for other vulnerable devices.
There’s a practical problem too. A password given to clients, couriers and contractors reaches dozens of people over time. You no longer know who has it, and changing it means reconnecting every company computer, printer and phone.
What a guest network is
A guest network is a separate Wi-Fi network with its own name and password that provides internet access only. Most small-office routers, and many home routers, have the feature built in, usually in a menu called Guest Network.
What it does in practice:
- Keeps guests away from the company network. Devices on the guest network can’t see the computers, printers or server.
- Keeps guests away from each other, if you enable client isolation. One visitor’s laptop can’t see another visitor’s phone.
- Has its own password, which you can change at any time without affecting the company network.
- Can have limits, on speed or hours for example, so guests don’t take up all the bandwidth.
How to set up guest Wi-Fi on your router
Menus differ between manufacturers, but the steps are the same:
- Log in to the router’s interface, usually in a browser at an address like 192.168.0.1 or 192.168.1.1, or through the manufacturer’s app. If the admin password is still the one on the label, change it now.
- Find the guest section, usually under Wireless, Wi-Fi or Guest Network.
- Turn on the guest network on the bands you need: 2.4 GHz, 5 GHz or both.
- Choose a clear name (SSID), such as “Company-Guest”, different from the main network’s name. Don’t put details about the router or the password in the name.
- Set security to WPA2 or WPA3 with a password of at least 12 characters. Don’t leave the network open without a password.
- Turn off access to the local network. The option appears under names like “Allow guests to see each other and access my local network” or “Access intranet”. It must be off.
- Enable client isolation (also called AP isolation), if the router has it.
- Set a speed limit, if the router allows it, so one guest’s downloads don’t slow the team down.
- Save and test. Connect a phone to the guest network and check that it has internet but can’t see the printer or shared folders.
The test in the last step matters. On some routers, the guest network is separate in name only until you tick the isolation option. Repeat the test after every firmware update or router reset, because settings can revert to factory defaults.
For the basic settings on a new router, such as the admin password and firmware updates, you’ll find the steps in our article on new router setup.
WPA2, WPA3 and the network password
Wi-Fi security is chosen on the same router page. In short:
- WPA3 is the current standard. The Wi-Fi Alliance states that WPA3-Personal users get stronger protection against password-guessing attempts and that WPA3 is mandatory for Wi-Fi CERTIFIED devices.
- WPA2 is still widely used and acceptable with a long password.
- WEP and WPA (with no number) are old and insecure. If the router still offers them, don’t use them.
Many routers have a mixed WPA2/WPA3 mode, which lets newer devices use WPA3 and older ones WPA2. It’s a good choice for a guest network, where you don’t know which phones will turn up.
The guest network password doesn’t need to be as secret as the company one, but it shouldn’t be “12345678” either. A short phrase that’s easy to read out, with a few numbers, is a good compromise. The main company network gets a long, generated password kept in your password manager.
Check the main company network too
A guest network solves only half the problem. The network your staff work on needs a few checks of its own:
- A long, generated password of at least 16 characters, known only to staff and kept in the company password manager.
- WPS turned off. The feature that connects devices at the press of a button or with a PIN is convenient, but on many older routers the PIN can be guessed. If you don’t use it, switch it off.
- The password changed when someone who knew it leaves, especially after a difficult departure.
- The router’s admin interface reachable only from the company network, not from the guest network and not from the internet.
- Router firmware kept up to date. Manufacturers fix security holes found after the router’s release through updates.
Hiding the network name (a hidden SSID) doesn’t help much. The network stays visible to programs that look for it, and company devices find it harder to connect. A good password protects far more than a hidden name.
Printers, cameras and other devices
One case that often causes confusion: a guest wants to print something. If the printer is on the company network, they can’t see it from the guest network. And that’s how it should be.
Practical options:
- the guest emails the document to a colleague, who prints it;
- use the printer’s direct printing feature (Wi-Fi Direct), if it has one, with its own password;
- for meeting rooms used often, a separate printer placed on the guest network.
Security cameras, smart TVs, thermostats and similar devices often run software that’s rarely updated. Some companies put them on a separate network too, precisely so that a problem with a camera can’t reach the computers. That usually requires a router or other equipment that supports several separate networks (VLANs), not just a guest network.
How to share the password and how often to change it
A few habits that make life easier at reception:
- Display a QR code with the guest network details. Phones connect by scanning it, without typing the password. Many routers and apps generate one directly.
- Change the password regularly, for example once a month or after an event with lots of visitors. Because the network is separate, the change affects nothing in the company.
- Schedule the network, if the router allows, to run only during working hours.
- Never give the main network password to a visitor, however much of a hurry they’re in. Colleagues need to know the guest network exists and where its details are displayed.
Staff connect their personal phones to the guest network, not the company one. A personal phone is still a device the company doesn’t control.
For meetings with many attendees, or a presentation at your premises, check the guest network the day before: the signal in that room, the speed limit, the number of devices allowed. A small office router may have a limit on simultaneous connections, and the problem shows up exactly when the room is full.
When the provider’s router isn’t enough
The router you got from your internet provider usually copes with a small office. Its limits show when:
- the signal doesn’t cover the whole office and guests in the meeting room have no internet;
- the router has no guest network, or can’t isolate it;
- you need several separate networks (company, guests, cameras);
- lots of people connect at once and the connection drops.
The fix is usually a router of your own, with the provider’s router left as a modem only, plus one or more Wi-Fi access points. How to plan a small office network is covered in our article on the small office network. If the only problem is coverage, much of the advice for homes applies to offices too, as in our article on weak Wi-Fi.
Frequently asked questions
Do we have to keep a record of who connects to our Wi-Fi?
For an office that provides internet only to its own visitors, there’s usually no specific requirement of this kind. That changes if you offer public internet, in a café or a coworking space for example. If you’re not sure, get legal advice for your particular business in Romania.
What is a terms-acceptance page when connecting?
Some routers show a page where guests accept the terms of use before they get internet. It’s called a captive portal. It’s useful in public spaces, but for an office with a few visitors a day a simple password is usually enough.
Does a guest network slow down the company internet?
It shares the same internet connection, so a guest downloading large files can be noticeable. A speed limit on the guest network fixes that. The separate network itself doesn’t slow anything down.
Can we put the guest network on a different internet connection?
Yes, with a second internet subscription and a separate router. It’s the strictest setup, used when there are many guests or the company network needs very strong protection. For most small offices, a guest network on the same router is enough.
Is MAC address filtering worth it?
MAC filtering lets only devices on a list connect. It sounds secure, but a MAC address is easy to copy, and modern phones use a different MAC address for each network. In a small office, the list becomes more a source of problems than of protection. A good password and a separate guest network do more.
How do we check that guests really can’t see the company network?
Connect a laptop to the guest network and try to open a shared folder, add the printer or open the router’s admin page. None of these should work. If one does, check the local network access option and client isolation.
When to call a technician
On many routers, a guest network takes ten minutes to set up. Call a technician when the router doesn’t have the option, when the test shows guests can see the company network, when you need several separate networks or when the signal doesn’t cover the offices.
Setting up and checking the network is one of the everyday IT services for small businesses. If you want the router, Wi-Fi and connected devices looked after regularly, see what our IT maintenance for businesses includes. A guest network is one of the measures in our guide to small business IT security.